Browsing "Older Posts"

Used Construction Machinery – Auction versus Dealer oleh - excavatorsakai.xyz

Halo sahabat selamat datang di website excavatorsakai.xyz, pada kesempatan hari ini kita akan membahas seputar Used Construction Machinery – Auction versus Dealer, kami sudah mempersiapkan artikel tersebut dengan informatif dan akurat, silahkan membaca

When your fleet requires additional plant equipment, would you research used construction machinery, or would you buy at an auction? 

Both ways are popular methods of obtaining machinery, and they each have their own advantages and disadvantages. By using our handy guide you can learn the tricks of the trade when it comes to buying used construction machinery.

What are the benefits of buying used construction machinery from an auction?

The main benefit of buying second hand diggers at an auction is that they are considerably cheaper than a dealer. Although, depending on the type of machinery on offer, it could be a very popular choice of machine among other buyers.

When it comes to other bidders, if more than one person is bidding for the same machine, it is reassuring knowing that the product is in high demand, and that it must be of a good condition. 

If you're looking to buy older machinery, an auction is where you'll find it. There is a larger variety of plant equipment available at an auction. Most dealers will sell machines from their fleet, which may only consist of certain of brands. 

When dealing with private dealers, whether it's from a large company or a one-man band, getting a deal can be easy. It's a long way from physically having the machine in your possession, and the money has been paid though. Some dealers could back out of the deal, whereas when the hammer lands, the product is yours.

What are the disadvantages of buying from an auction?

Although auctions sound like the place to go for used construction machinery, it definitely has its fair share of disadvantages.

When machines are purchased from an auction, the buyer will not be given any time to inspect the machine. They will also not be able to check for any damage or faults. Therefore, if the buyer is unhappy with the condition of the machine, they aren't able to get their money back, as there are no refunds. 

Another disadvantage is that the used construction machinery will come with no form of warranty, or even a service. The buyer will receive the machine as it comes. It will then be down to them to pay out for a service if it is required. 

A machine could be operational when it is bought from an auction, but it could still be in a bad condition. Unfortunately, it cannot be guaranteed how much work will be needed to fix the equipment up, resulting in a costly bill for the buyer.

What are the benefits of buying from a dealer?

Purchasing used construction machinery from a dealer, such as BuyADigger will provide many benefits.

Most dealers will be able to provide a full service history for the plant equipment, or it will be fully serviced upon buying. As the equipment has been bought from new, and used within the plant fleet, the machine will generally have lower hours.

Here at BuyADigger, we sell our machines with a 3 months warranty on all major components. This will include anything from the engine, excavator arms, and even the boom cylinders. Although the construction machinery is used, it isn't just an everyday purchase. Having a warranty cover will give buyers peace of mind, knowing that any issues will be rectified without it being costly.

Machines bought from dealers are also usually in a much better condition, in comparison to an auction. Whilst the price is slightly higher to buy machinery, it will generally cost less in the long run. 

Used construction machinery - inspecting a machine

Used construction machinery

What are the disadvantages of buying from a dealer?

Price matters when it comes to buying second hand machinery, but it all depends on where you want to spend it.  As mentioned above, buying a machine from an auction will be cheaper, in comparison to a dealer, so if you're looking for a relatively cheap deal then an auction is the place to be.

At the same time, discounts can also be given here at BuyADigger. We can offer a multi-buy discount when you choose to buy more than one machine, this could bring down the cost drastically if you purchase a fleet of machinery from us.

As long as you are buying from reputable dealers, the likelihood of the deal falling through or potentially going wrong is extremely low. If the dealer is part of a digger hire business, they may need to pull the used construction machinery off the stock list in order to go ahead with a long term hire instead.

Which option should you choose?

Are you still in two minds about your options? If so, we would highly recommend buying from a dealer. When you choose BuyADigger, we can offer you plenty of photos and videos of the second hand diggers in full working order. If you would like to come and see the machine, we can accommodate this.

We list our machines on external sites including Mascus, Machinery Trader and even Autoline. You'll likely have already seen our machines if you've been doing your research.

View all of our available used construction machinery, and get in touch with the team today. Send us an email or give us a call on: 01634 779123 for a quote.

Itulah tadi informasi mengenai Used Construction Machinery – Auction versus Dealer dan sekianlah artikel dari kami excavatorsakai.xyz, sampai jumpa di postingan berikutnya. selamat membaca.

Selasa, 18 Agustus 2020

Used Construction Machinery – Auction versus Dealer oleh - excavatorsakai.xyz

Halo sahabat selamat datang di website excavatorsakai.xyz, pada kesempatan hari ini kita akan membahas seputar Used Construction Machinery – Auction versus Dealer, kami sudah mempersiapkan artikel tersebut dengan informatif dan akurat, silahkan membaca

When your fleet requires additional plant equipment, would you research used construction machinery, or would you buy at an auction? 

Both ways are popular methods of obtaining machinery, and they each have their own advantages and disadvantages. By using our handy guide you can learn the tricks of the trade when it comes to buying used construction machinery.

What are the benefits of buying used construction machinery from an auction?

The main benefit of buying second hand diggers at an auction is that they are considerably cheaper than a dealer. Although, depending on the type of machinery on offer, it could be a very popular choice of machine among other buyers.

When it comes to other bidders, if more than one person is bidding for the same machine, it is reassuring knowing that the product is in high demand, and that it must be of a good condition. 

If you're looking to buy older machinery, an auction is where you'll find it. There is a larger variety of plant equipment available at an auction. Most dealers will sell machines from their fleet, which may only consist of certain of brands. 

When dealing with private dealers, whether it's from a large company or a one-man band, getting a deal can be easy. It's a long way from physically having the machine in your possession, and the money has been paid though. Some dealers could back out of the deal, whereas when the hammer lands, the product is yours.

What are the disadvantages of buying from an auction?

Although auctions sound like the place to go for used construction machinery, it definitely has its fair share of disadvantages.

When machines are purchased from an auction, the buyer will not be given any time to inspect the machine. They will also not be able to check for any damage or faults. Therefore, if the buyer is unhappy with the condition of the machine, they aren't able to get their money back, as there are no refunds. 

Another disadvantage is that the used construction machinery will come with no form of warranty, or even a service. The buyer will receive the machine as it comes. It will then be down to them to pay out for a service if it is required. 

A machine could be operational when it is bought from an auction, but it could still be in a bad condition. Unfortunately, it cannot be guaranteed how much work will be needed to fix the equipment up, resulting in a costly bill for the buyer.

What are the benefits of buying from a dealer?

Purchasing used construction machinery from a dealer, such as BuyADigger will provide many benefits.

Most dealers will be able to provide a full service history for the plant equipment, or it will be fully serviced upon buying. As the equipment has been bought from new, and used within the plant fleet, the machine will generally have lower hours.

Here at BuyADigger, we sell our machines with a 3 months warranty on all major components. This will include anything from the engine, excavator arms, and even the boom cylinders. Although the construction machinery is used, it isn't just an everyday purchase. Having a warranty cover will give buyers peace of mind, knowing that any issues will be rectified without it being costly.

Machines bought from dealers are also usually in a much better condition, in comparison to an auction. Whilst the price is slightly higher to buy machinery, it will generally cost less in the long run. 

Used construction machinery - inspecting a machine

Used construction machinery

What are the disadvantages of buying from a dealer?

Price matters when it comes to buying second hand machinery, but it all depends on where you want to spend it.  As mentioned above, buying a machine from an auction will be cheaper, in comparison to a dealer, so if you're looking for a relatively cheap deal then an auction is the place to be.

At the same time, discounts can also be given here at BuyADigger. We can offer a multi-buy discount when you choose to buy more than one machine, this could bring down the cost drastically if you purchase a fleet of machinery from us.

As long as you are buying from reputable dealers, the likelihood of the deal falling through or potentially going wrong is extremely low. If the dealer is part of a digger hire business, they may need to pull the used construction machinery off the stock list in order to go ahead with a long term hire instead.

Which option should you choose?

Are you still in two minds about your options? If so, we would highly recommend buying from a dealer. When you choose BuyADigger, we can offer you plenty of photos and videos of the second hand diggers in full working order. If you would like to come and see the machine, we can accommodate this.

We list our machines on external sites including Mascus, Machinery Trader and even Autoline. You'll likely have already seen our machines if you've been doing your research.

View all of our available used construction machinery, and get in touch with the team today. Send us an email or give us a call on: 01634 779123 for a quote.

Itulah tadi informasi mengenai Used Construction Machinery – Auction versus Dealer dan sekianlah artikel dari kami excavatorsakai.xyz, sampai jumpa di postingan berikutnya. selamat membaca.

Rabu, 12 Agustus 2020

Tracked excavators for sale – Why should you buy a Komatsu PC138? oleh - excavatorsakai.xyz

Halo sahabat selamat datang di website excavatorsakai.xyz, pada kesempatan hari ini kita akan membahas seputar Tracked excavators for sale â€" Why should you buy a Komatsu PC138? oleh - excavatorsakai.xyz, kami sudah mempersiapkan artikel tersebut dengan informatif dan akurat, silahkan membaca

Tracked excavators are currently dominating the construction industry, and making up the largest volume of excavators on the market. We look into why this is the case, as well as look at tracked excavators for sale here at BuyADigger.

Why should you choose a Komatsu PC138 tracked excavator?

What’s so special about a Komatsu PC138 tracked excavator we hear you ask? 

With plenty of choice when it comes to construction machinery, it’s time consuming selecting a brand of machinery, let alone the size of machinery required. 

A 13 tonne excavator is commonly seen on sites, so the popular Komatsu PC138 is a very good choice! 

They are incredibly useful for:

  • Working in confined areas/spaces
  • Completing work directly on the roadside
  • Working on rough and uneven terrain, as well as climbing up steep hills safely

When it comes to selecting a suitable excavator, picking a machine too small that doesn’t have the correct functionality will prevent the job being done efficiently. Choosing a large machine could mean it isn’t the correct fit for the job at hand.As they say size doesn’t always matter, and you should also take into consideration:

Depth

Depth is a huge factor when selecting machinery to buy. Although a Komatsu PC26 can be handy, the reach on the digger arm just isn’t going to cut it. A Komatsu PC138 US-10 has a maximum reach of 5.9m making it perfect for landscaping and other larger projects.

Bucket Size

If a project requires material to be moved, companies would have a timescale in mind when they would like to have it done by. Moving a large amount of material will require large buckets and attachments to achieve this. Making sure the excavator is large enough to equip the required bucket size is another important factor to think about.

Larger tracked excavators not only offer more power and reach than standard sized machinery, they’re also fitted with hydraulic systems that will make them capable of handling larger plant attachments.

Lifting Capacity

When we think of lifting capacity, we think of the power of the machine. What we don’t realise is that an excavator needs an adequate counterweight, which acts as an anchor.

Steel Tracks or Roadliner Pads?

Here at BuyADigger we stock a range of tracked excavators for sale, including Komatsu PC138s with steel tracks and roadliner pads. What would you require? Depending on the type of project, it will depend on the type of tracks needed. Luckily, both sets of tracks are versatile, but there are advantages to using both of them.

Steel Tracks

Steel tracks are made using high quality steel. They are fitted to the excavator and work on a loop cycle when the machine moves. The benefit of using steel tracks will allow the operator to move over areas containing gravel, and other loose ground surfaces. They will also provide more traction and stability, which will be beneficial for a construction site. With every advantage comes a disadvantage which is the pricing. Steel tracks are generally more expensive to maintain and replace, although they do last up to twice the amount of time in comparison to rubber roadliner pads.

Roadliner Pads

Roadliner pads are made of rubber and bolted onto the tracks of the excavator. They are designed for protecting the machine and are incredibly durable. If you want to buy a tracked excavator for sale for landscaping or roadside work, using roadliner pads will protect the surface and stop them from being damaged. If an operator is on site for long periods of time, it makes sense to buy a tracked excavator with roadliner pads just for the increased comfort. 

Komatsu PC138US-10

Tracked excavators for sale at BuyADigger

Here at BuyADigger we have a large variety of Komatsu PC138s that vary in age, hours and track type. If you aren’t completely satisfied with a Komatsu PC138 or a larger digger, we do have some alternatives for you, including:

We know that the price will increase as the size of the excavator does, which is why a large portion of the target market are choosing to buy second hand diggers from trusted suppliers instead. 

About Masterhitch Europe Ltd

Masterhitch Europe Ltd are also part of the H.E. Group. They are leading manufacturers of bespoke attachments and buckets for construction machinery. They can also provide bespoke services such as welding, profile cutting and bucket repairs and rehangs. 

If you’re looking at tracked excavators for sale and want some digger attachments to partner with it, we can give you a quote for these and Masterhitch can create these to match your requirements.

Why should you buy a digger from us?

If you are interested in purchasing any of our tracked excavators for sale then speak to the team at BuyADigger today via email or give us a call on: 01634 779123. 

You will have peace of mind knowing that all of our used construction machinery benefit from the following:

  • They are fully serviced
  • 3 months warranty on all major parts and components
  • International Delivery is available if required
  • Low hours

If you want to keep up to date with the new machinery added to our stock list, then you can sign up to our weekly newsletter here.

Itulah tadi informasi mengenai Tracked excavators for sale â€" Why should you buy a Komatsu PC138? oleh - excavatorsakai.xyz dan sekianlah artikel dari kami excavatorsakai.xyz, sampai jumpa di postingan berikutnya. selamat membaca.

Jumat, 07 Agustus 2020